A3

Replacement Interval Guide Audi recommend replacement every 75,000 miles or 5 years. The previous use and service history of the vehicle must always be taken into account. Check For Engine Damage CAUTION: This engine has been identified as an INTERFERENCE engine in which the possibility of valve-to-piston damage in the event of a timing belt […] More

Special tools Camshaft alignment tool – No.T40094. Camshaft holding tool – No.T40095. Camshaft sprocket hub holding tool – No.T10051. Camshaft sprocket hub puller – No.T10052. Camshaft/high-pressure fuel pump locking tool – No.3359. Crankshaft sprocket locking tool – No.T10050. Two-piece exhaust camshaft gear alignment tool – No.T40096/1. General precautions Disconnect battery earth lead. Remove glow plugs […] More

Аudi А3 Cambelt Change Interval →2003MY: No manufacturer’s recommended replacement interval.NOTE: Audi UK recommend the timing belt is replaced every 5 years. 2004MY→: Audi recommend replacement every 75,000 miles or 5 years. The previous use and service history of the vehicle must always be taken into account. Check For Engine Damage   CAUTION: This engine has […] More

Special tools Camshaft alignment tool – Tool No.T10171. Dial gauge – Tool No.VAS 6079. Dial gauge holder – Tool No.T10170. Tensioner locking tool – Tool No.T40011. Crankshaft pulley/camshaft sprocket holding tool – Tool No.T10172. General precautions Disconnect battery earth lead. Remove spark plugs to ease turning engine. Turn engine in normal direction of rotation (unless […] More

Special tools Camshaft alignment tool – No.T10171A. Camshaft sprocket holding tool – No.T10172. Crankshaft pulley holding tool 1 – No.3415. Crankshaft pulley holding tool 2 – No.3415/1. Crankshaft timing pin – No.T10340. Dial gauge – No.VAS 6079. Dial gauge holder – No.T10170. Tensioner locking tool – No.T40011. General precautions Disconnect battery earth lead. Remove spark […] More

General precautions Disconnect battery earth lead. Remove spark plugs to ease turning engine. Turn engine in normal direction of rotation (unless otherwise stated). Observe tightening torques. If fitted: Mark position of crankshaft position (CKP) sensor before removal. Do NOT turn crankshaft via camshaft or other sprockets. Do NOT turn crankshaft or camshaft with timing chain […] More